Swashdrive Tattoo Machines
HomeTattoo MachinesAccessoriesSpare PartsAboutTech SpecsFAQ'sVideosContact Us

Slide - Combo (Screw Fit)

Slide - Combo (Screw Fit) Slide - Combo (Screw Fit) Slide - Combo (Screw Fit)
Click on image to see larger version.
All Transactions are Processed in AUD$



Buy 1 for AUD$525.00

 Qty
PRODUCT ID - 56



 
The Swashdrive Slide was our original, point and shoot Liner, it's now had a facelift. The latest Slide Tattoo Machine is another Original Swashdrive Innovation built specifically for the Tattoo artist.

We at Swashdrive have been pioneering and refining different & unusual technologies in Tattoo machinery since 1993.

We have refined of our original machine with our added ball track scotch-yoke technology making the latest version the smoothest version yet.

In addition, our combo version allows you to use standard needles or cartridges, with our Swashdrive Grip (or Cheyenne style grips).
 
Important Information on the Brushless Motor: 

Brushless Motor Characteristics:

The brushless motor powering your new Swashdrive is an entirely new technology in small DC powered motors.

A minimum start-up voltage of 9.0 volts is required to activate the electronic circuit board that controls the motor. This may seem high but thatís the way itís designed and will not cause any damage. The current draw at 9.0 volts is only 0.1 amp (0.9   watt) and 20 volts will draw 0.5 amps and deliver a massive 10 watts of power.

The brushless motor also has an internal speed governing circuit which maintains very accurate speed settings as load varies during operation, the result is super smooth running and zero motor surging.

Important to note - the power input is polarity sensitive + -  
The positive (Red) wire must be connected to  centre of the RCA plug
Wiring the machine the other way will not destroy anything, it simply will not operate!

There is also an overload cut out to prevent motor destruction in the event of a lockup or overload situation. In this case, the motor will trip out and reset after 3 seconds before restarting.

Operating Voltages

  9 volts at start-up will deliver 2000 rpm or 33 CPS
11 volts = 3000 rpm / 50 CPS
13 volts = 6000 rpm / 100 CPS
16 volts = 9000rpm / 150 CPS
Maximum RPM is 22 volts 

Machine Weight: 
 

Remember if you are still using clip cords you can purchase and adaptor RCA to Clip Cord.


 
 
 Swashdrive Tattoo Machines  Swashdrive Tattoo Machines  Swashdrive Tattoo Machines

Phn: +61 7 3324 2428 

1st Floor, 380 Logan Road
(PO Box 622)
Stones Corner Qld 4120 Australia

Swashdrive Tattoo MachinesSwashdrive Tattoo MachinesSwashdrive Tattoo Machines

Ordering Policy - Service & Maintenance - Privacy Policy

©2017  All Rights Reserved  -  Swashdrive Tattoo Machines  -  ABN - 62559349399
Location Address -  1st Floor, 380 Logan Road, Stones Corner Qld. 4120 AUSTRALIA
Postal Address -  Po Box 622, Stones Corner Qld. 4120 AUSTRALIA
The Zen Bull
Powered by The Zen Bull
Professional Website Software